Make the leather surface clean using water, dry out properly and then apply the waterproof ingredient (it may be wax, waterproofing aerosol, or cream).
Table could not be displayed.How to Waterproof Leather Boots for Winter?
You are just a few steps away from getting the perfect waterproof seal. and making the boots ready for winter.
Clean Your Boots
Cleaning before putting in waterproof materials is a must. First, clean dirt, mud, or any other outing from the boot. Debris may defend the wax from reaching certain places of shoes, leaving free access to water.
Make a Test
Before applying the waterproof compounds, you can play a patch test. Spread a very little wax or spray and wait for thirty minutes. It will help you to know what material works on your shoes well.
Different Cleaning Methods
Execution is simple, but each idea worth quite a lot.
Using Toothbrush
Take a toothbrush, wet it, and put it in a small water bowl. And then brush gently and remove the dirt over the boot surface.
Use Vinegar Mixture
Take the same amount of water and vinegar mixture in a cup, bring a microfiber cloth, soak it and wash.
Baking Soda
First, wet a soft cloth into the water and then dip into baking soda (obviously a cup of baking soda). Then rub and dry under the sun.
Leather Cleaner
It is not necessary for removing ordinary dirt and debris. If you find your strains very hard to remove, apply a small amount of leather cleaner on the dirt area, wipe it down and dry.
To Clean the Soles
For cleaning the soles full of dirt, take them in a bucket. Take an inch of water, wait for a few hours. In this way, all dirt and crud will be loose. After that, wash it with flowing water using a hose and dry it in the air.
Note: Never do overheat as it causes the leather materials to crack quickly. For quick drying, you can depend on the light heat coming from the hairdryer. This will ensure better drying and soaking of the wax more easily.
Apply the Waterproofing
Days of only waxing have long gone. The alternatives are hard to compete.
Dubbing Wax
It is a very common process. Not only does it defend the water, but it also makes the leather soft and looking great! Follow the actions one by one.
Put a little Wax on a New Cloth
First, eliminate the laces. Take a small amount of dubbing wax on a soft cloth, extend as much as you reach. Wipe for several times and make sure that all upper areas are covered. Take enough time for putting the wax on the seams.
Wait
Then dry for thirty minutes to an hour. Keep the boots in a dry but cool place. After drying examine the boot surface searching for extra wax, remove them using a dry cloth. For getting an extra shine, you may apply some polish.
Waterproofing Spray
Sometimes, the wax may damage the leather and suede combination. So, if you face this problem, we are suggesting using the sprays.
Step 1
These are special sprays for leather and synthetic materials. So, choose the required spray for the leather. Many of the sprays are available with Silicon Polymer materials. But the Acrylic Co-Polymer materials are found more effective than them.
Step 2
Take a distance of at least five centimeters from the spray nozzle and the boot surface. Go through the full surface and make a thin coat over. Ensure that each centimeter is contacted with spray drops. Repeat this process if needed.
Creams
Some waterproofing agents come as creams. This is also considered a good option. Bring the applicator you found with the cream. If the manufacturers don’t provide any of those, use a clean cloth. Then rub the cream and cover the full surface.
Note
It doesn’t matter at all what type of agents you are using. Just cover the full boot body along with all hard-to-reach surfaces. Pay more time on seams and creases.
Dry
Dry the boots by putting them in a place with medium temperature with high ventilation and low humidity. Never use the direct sunlight, run the fan. It will be better to keep the balled-up newspapers to absorb moisture.
Why Waterproofing is Needed?
Read the actual reasons and find why the waterproofing of the leather boots is a must job!
To Protect the Feet
In the toughest winter weather of the year, if your boot is faulty, your feet can be soaked with water or snow while stepping. Waterproofing may be the most perfect strategy to save your feet. So, waterproof the boots and make wet feet a distant memory.
Prevent Infections
Imagine, you are waking with boots that cannot defend the water. As soon as you feel your socks wet with dirty water. Moisture will create uncomfortable situations and if you keep running this, it will affect your health and you may face infections.
Protect the Leather
It may be the main reason! Leather materials are very sensitive to moisture. If the boots come through water and absorb water for a long time, they start drying out and cracking. So, for the sake of durability, start waterproofing now!
Boot Waterproofing Spray
Whatever it is leather shoes or hiking boots, these sprays are best for boosting the water defending capability.
1. Apple Brand Garde Rain & Stain Water Repellent
What We Like
It forms a protective layer that ensures perfect safety if you are caught in the rain. Not only the water, but its compounds also keep the boot free from salt stains, oil, grease, etc. Apple Brand Garde doesn’t fade the color or shine.
Cons
- Not suitable for using it on pebbled leather.
2. The Art of Crep Protect Spray
What We Like
This spray creates an invisible barrier by using its nanotechnology formula. And that barrier prevents any of the stains or rain. It is available in a 5 oz spray bottle and goes with suede, canvas, or nubuck. Crep Protect spray is made in the US, with a different blend of ingredients and dries so quickly.
Cons
- Its soil resistance is not great.
3. Rust-Oleum, Clear 280886 Shield H2O Boot and Shoe Spray
What We Like
Its silicon-free technique and crystal-clear formula stop the change of the boot appearance. One bottle will cover 20 to 60 square feet. This product is safe for most shoe materials and can repel any of the water, ice, mud, or stains. The Sheild H2O is said to be a superhydrophobic coating.
Cons
- It has a strong smell.
FAQ
Q: Do WD 40 waterproof boots?
Ans: Yes, it works as a water barrier and removes disgusting salt stains.
Q: Can I use Vaseline to waterproof shoes?
Ans: Vaseline can be used as a temporary waterproof compound.
Q: What to spray on boots to make them waterproof?
Ans: You should spray wax, silicon sprays, or cream sealants as waterproof materials.
Q: Are our waterproof shoes waterproof?
Ans: Yes, the coating is waterproof. One of the materials used here is a waterproof-breathable fabric.
Conclusion
Whatever your waterproof compound is, we will tell you the ways to use it and make the boots ready for winter. Also know here, why waterproofing the leather is urgent and what is the best water defending sprays.
Leave a Reply